SPARE PARTS FOR CASE IH & NEW HOLLAND TRACTORS
In the world of agriculture, agricultural machinery is one of the most important elements for tillage and production, as well as for crops that must be harvested at a very specific time.
One of the most common inconveniences for farmers is that after a certain period of time, the machines that are responsible for doing all the hard work can wear out and get damaged due to lack of maintenance or wear of a spare parts.It should be borne in mind that in an agricultural machine, regardless of its brand, most of the parts are consumables, as they have a useful life and if this period is exceeded, this part must be replaced so that the equipment to continue to work under optimal conditions and not slow down production.
At MAQ PARTS, we have many years of experience working with producers of a wide variety of crops and all kinds of machines, from small lawn tractors to large, high-capacity machines for large farmers.
CASE & NEW HOLLAND
The Case and New Holland brands are one of the most used tractors and combines in the agricultural sector, for which we have all the most common spare parts that are usually needed for these brands of agricultural machinery.MAQ PARTS HAS THE FULL RANGE OF SPARE PARTS FOR CASE AND NEW HOLLAND TRACTORS
At MAQ PARTS you can find all types of spare parts and replacements for your Case or New Holland engine, we have a wide range and deliveries to your yard, office or directly in the field, just order the necessary spare parts or contact our sales consultants, which will help you find the part. you need to continue producing your crops.Remember that each machine has its own serial number, as each engine has an alphanumeric code that depends on the series and model, you should have this information on hand when ordering your spare part, as this will ensure that you receive only the part you need, not another.
You should also know that the parts we work with at MAQ PARTS are manufactured in the same factory where the original engines used in the Case and New Holland machines were designed and assembled.
The parts we offer are custom made and are exactly the same as originally used in the engines, so you can be sure that whatever part you need to repair your tractor, it will work smoothly in your machine. and you will not have a problem with the work.
Some of the most common engine parts sought after by farmers are engine spare parts:
● CYLINDER BLOCKS● CRANKSHAFTS
● MAIN BEARINGS
● CON ROD BEARINGS
● PISTONS
● OIL PUMPS
● WATER PUMPS
● FUEL PUMP
● LINERS CYLINDERS
● CON RODS
● GASKETS
To purchase any of these parts, you can directly visit our official website https://maq-parts.com/page/agricultural in the "spare parts for" section, just select the type of machine, whether agricultural or construction, and then this choose the brand of your machine or just contact us to help you find the necessary spare part as soon as possible so that your tractor or other machine can start working again.
Here you can find the brands Case IH and New Holland AG, for both brands you will have a section where you will find all models of agricultural machinery, just choose your own and look for the part you need, if you do not find it then contact our customer service team, they will ask you a few questions and help you find the part you need without a problem.
MOST DEMANDED SPARE PARTS FOR TRACTORS
There are some spare parts that wear out much faster than others, this is because some parts of the machine are exposed to higher loads or greater effort, which reduces the useful life of parts that are more exposed to these efforts, some of them are the following.Engine block: This part is a metal structure, which contains the entire system for generating engine power, it can be said that it is one of the most important parts and with us you can find it at an excellent price, original and ready for immediate delivery throughout Europe.
Engine head: Also known as a cylinder head, it is the top of the engine that houses the valves or cylinders that produce power. This part is extremely delicate and the reason for its damage is usually due to poor preventive maintenance or saturation of metal in the oil used for the engine.
VALVES:
This is one of the most common parts that suffer from wear and tear, just as filters or oil are consumables, valves should also be considered as consumables as they suffer unavoidable wear and tear as they are the part responsible for generating combustion inside in the engine, it is always good to have spare valves on hand at all times so as not to slow down production.
PISTONS:
Pistons are a very durable part, but they tend to suffer damage or damage due to poor maintenance. If this is the case with your machine, it is likely that they have recently had maintenance and did not properly install the cylinder heads, this causes a problem imbalance in the movement of the pistons, causing them to rub into the cylinder lining, causing wear, which has no solution , before purchasing this part, make sure that the cylinder heads are in good condition, otherwise you will have to replace both parts.
CYLINDER LINERS:
Like pistons, the cylinder liner or so-called "shirt" is a very durable part that should not fall apart in the first few years. If there is damage to the machine at an early age, it is usually due to poor preventive maintenance. This part is economical, but very difficult to install, seek the help of a professional to perform this procedure.
FUEL INJECTION PUMPS:
The fuel pump is a very sensitive part of any machine, the main reason for its damage is usually due to the fact that the machine was equipped with low quality fuel or high sulfur diesel, which clogs the nozzles. A faulty pump is a waste of fuel, so it is best to replace it as soon as possible when it is found to be damaged. Fuel Injection Pump can cause serious damage to your engine, so you should monitor regularly for leaks or changes in smoke coming out of the exhaust.
MAQ PARTS offers high quality Fuel Pumps from world manufacturers Delphi, Bosch, Stanadyne and others, which are supported by a full factory warranty of 12 months. Keep in mind that the unofficial warranty of these brands of fuel pumps is about 10,000 moto hours.
FUEL LIFT PUMPS:
In addition to the fuel lift pump, each engine is equipped with a fuel booster pump, this part is usually defective due to the presence of solid materials or too long, the machine did not work to avoid its disintegration, care must be taken when refueling in the tank, this part is not expensive and can be replaced by yourself, because you do not need a specialist to replace the booster pump.
FUEL FILTERS:
Fuel filters are the first line of defense for the injection pump and the booster pump, it is responsible for retaining all solid particles that can be suspended in the fuel and thus prevent them from reaching the engine or other parts. more delicate.
You should keep in mind that all filters are consumables for your machine, so we recommend that you have at least one filter from each in your inventory at all times to make replacements when needed. This is one of the fastest filters that wear on Case and New Holland machines, try to change it every 300 moto hours and have at least 2 fuel filters available in your inventory for each machine. Frequent replacement of the fuel filters on your machine will extend the life of your fuel system (Fuel Injection Pump, Fuel Injection Pump, Nozzles) and, in general, the life of your engines.
The main defects of almost every engine in tractors are caused by the fuel system.
MAQ PARTS recommends that you replace the fuel filters every 250-300 moto hours, not as every dealer of the brand assures you that the filters are changed every 500 moto hours.
AIR FILTERS:
Just as valves, air filters on an agricultural machine and any vehicle in general should be considered consumables, it is ideal to change the air filter every 500 hours, always try to have air filters in your inventory at all times. In case your machine runs in a more dusty environment, MAQ PARTS recommends that you change the air filters every 250 hours to keep your engines running well.
OIL FILTERS:
A major part of any farmer, the oil filter is responsible for retaining particulate matter so that it does not reach the engine pistons, it must be changed every 500 hours on average, if it runs longer than that your machine may start to have problems with engine parts that will be more expensive. Order high quality MAQ PARTS oil filters with extended life "Long Life" to ensure good performance of your engine.
TRANSMISSION FILTERS:
The transmission is responsible for transmitting power to the wheels of the machine and like any moving mechanical part, it also has a filter that helps clean the system fluids that drive the entire transmission, it is one of the most durable filters and needs to be replaced only after every 1200 hours of use.
HYDRAULIC FILTERS:
It is responsible for filtering liquids that pass through the hydraulic system of your machine, this filter is vital for the operation of the equipment, if you notice that the hydraulic arm of your machine has lost power, it may be Since it is time to replace the filter , it must be changed every 2000 hours of use.
NOTE: All agricultural machinery filters are easily accessible and you can replace them yourself without any problems, but if you do not have experience in this, we remind you that it is always good to have the help of a professional with experience in agricultural machinery mechanics.
MAQ PARTS TO PROVIDE HIGH QUALITY SPARE PARTS AT EXCELLENT PRICES
Finally, we remind you that if you urgently need a part for your Case and New Holland agricultural machine, you can contact us.
We have over 100,000 different items, so rest assured that we will be able to provide you with a service that will help you start your production as quickly as possible.
About Blog
Latest Posts
-
-
07.06.2022 -
-
-
-
-
Deliveries worldwideWe ship parts worldwide
-
12 months warrantyfor every product
-
100% SafetyOnly secure payments
-
Hot OffersDiscounts up to 90%
